AS ISO/ASTM 52921:2020
Standard terminology for additive manufacturing – Coordinate systems and test methodologies
standard by Standards Australia, 07/31/2020
Side Navigation
X
ASTM D6496/D6496M-23a
Standard Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners
standard by ASTM International, 04/15/2023
NFPA (Fire) 1987
Standard on Combination Unit Respirator Systems for Tactical and Technical Operations, 2023 Edition
standard by National Fire Protection Association, 04/04/2022
IEC 62281 Ed. 4.2 b:2023
Safety of primary and secondary lithium cells and batteries during transport CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 02/01/2023
Residential Space Heating Opportunities in Cold Climate Regions
Conference Proceeding by ASHRAE, 2023
ASTM F3352/F3352M-23b
Standard Specification for Isolation Gowns Intended for Use in Healthcare Facilities
standard by ASTM International, 06/01/2023
ASTM D4878-23
Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
standard by ASTM International, 05/01/2023
AS U17-1956
55 ton, 2 1/2 per cent nickel-chromium-molybdenum steel (limiting ruling section 6 in.)
standard by Standards Australia, 01/01/1956
NACE No. 3 – SSPC SP6
Joint Surface Preparation Standard: Commercial Blast Cleaning
standard by National Association of Corrosion Engineers, 10/01/1994
