Side Navigation

X

AASHTO M 294-13

Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm (12- to 60-in.) Diameter
standard by American Association of State and Highway Transportation Officials, 2013

AASHTO T 164-08

Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot-Mix Asphalt (HMA)
standard by American Association of State and Highway Transportation Officials, 08/01/2008

AASHTO M 282-99 (2012)

Standard Specification for Joint Sealants, Hot-Poured, Elastomeric-Type, for Portland Cement Concrete Pavements (ASTM D3406-95 (2006))
standard by American Association of State and Highway Transportation Officials, 1999

AASHTO HSM-1

Highway Safety Manual, First Edition, with 2014 Supplement and 2016 Errata
standard by American Association of State and Highway Transportation Officials, 08/01/2010

AASHTO T 129-14 (2018)

Standard Method of Test for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste (ASTM C 187-11e1)
standard by American Association of State and Highway Transportation Officials, 2014

AASHTO M 322M/M 322-06

Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
standard by American Association of State and Highway Transportation Officials,

AASHTO T 242-96 (2013)

Standard Method of Test for Frictional Properties of Paved Surfaces Using a Full-Scale Tire (ASTM Designation: E 274/E 274M-11)
standard by American Association of State and Highway Transportation Officials, 1996

AASHTO M 332-18

Standard Specification for Performance-Graded Asphalt Binder Using Multiple Stress Creep Recovery (MSCR) Test
standard by American Association of State and Highway Transportation Officials, 2018

AASHTO M 220-84 (2012)

Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements (ASTM D2628-91 (2011))
standard by American Association of State and Highway Transportation Officials, 1984

AASHTO T 152-05

Standard Method of Test for Air Content of Freshly Mixed Concrete by the Pressure Method
standard by American Association of State and Highway Transportation Officials,