Side Navigation

X

AASHTO T 240-09

Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) (ASTM Designation: D 2872-04)
standard by American Association of State and Highway Transportation Officials, 01/01/2009

AASHTO M 17-07

Standard Specification for Mineral Filler for Bituminous Paving Mixtures (ASTM Designation: D 242-04)
standard by American Association of State and Highway Transportation Officials, 08/01/2007

AASHTO R 46-08 (2017)

Standard Practice for Designing Stone Matrix Asphalt (SMA)
standard by American Association of State and Highway Transportation Officials, 08/01/2008

AASHTO M 31M/M 31-14

Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement (ASTM A615/A 615M-09b)
standard by American Association of State and Highway Transportation Officials, 2014

AASHTO M 259M-00 (2004)

Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers [Metric]
standard by American Association of State and Highway Transportation Officials,

AASHTO M 227M/M 227-19

Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties (ASTM Designation A 663/A 663M-17)
standard by American Association of State and Highway Transportation Officials, 2019

AASHTO T 180-18

Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
standard by American Association of State and Highway Transportation Officials, 2018

AASHTO T 132-87 (2018)

Standard Method of Test for Tensile Strength of Hydraulic Cement Mortars
standard by American Association of State and Highway Transportation Officials, 1987

AASHTO PH07-2

Practitioner's Handbook #7: Defining the Purpose and Need, and Determining the Range of Alternatives for Transportation Projects
Handbook / Manual / Guide by American Association of State and Highway Transportation Officials, 08/01/2016