Side Navigation

X

AASHTO M 268-08

Standard Specification for Retroreflective Sheeting for Traffic Control
standard by American Association of State and Highway Transportation Officials, 08/01/2008

AASHTO M 247-08

Standard Specification for Glass Beads Used in Traffic Paints
standard by American Association of State and Highway Transportation Officials, 08/01/2008

AASHTO T 368-17

Standard of Method of Test for Measure Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)
standard by American Association of State and Highway Transportation Officials, 2017

AASHTO T 27-11

Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (ASTM Designation C 136-06)
standard by American Association of State and Highway Transportation Officials, 2011

AASHTO QIPE-1

Guide to Quality in Preconstruction Engineering, 1st Edition
Handbook / Manual / Guide by American Association of State and Highway Transportation Officials, 01/01/2002

AASHTO MBE-3-E1

Errata for the Manual for Bridge Evaluation, 3rd Edition
Amendment by American Association of State and Highway Transportation Officials, 2018

AASHTO T 312-09

Standard Method of Test for Preparing and Determining the Density of Hot-Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
standard by American Association of State and Highway Transportation Officials, 2009

AASHTO T 135-13 (2017)

Standard Method of Test for Wetting-and-Drying Test of Compacted Soil-Cement Mixtures
standard by American Association of State and Highway Transportation Officials, 2013

AASHTO M 253-05

Standard Specification for Structural Bolts, Alloy Steel, Heat-Treated, 150 ksi Minimum Tensile Strength
standard by American Association of State and Highway Transportation Officials,

AASHTO MBE-2-M

Manual for Bridge Evaluation, 2nd Edition, 2011, with 2011, 2013, 2014, 2015 and 2016 Interim Revisions
standard by American Association of State and Highway Transportation Officials, 2011