Side Navigation

X

AASHTO PP 50-03 (2005)

Standard Practice for Operating Inertial Profilers and Evaluating Pavement Profiles
standard by American Association of State and Highway Transportation Officials,

AASHTO TP 126-17

Standard Method of Test for Evaluation of the Tracking Resistance of Hot-Poured Asphalt Crack Sealant by Dynamic Shear Rheometer (DSR)
standard by American Association of State and Highway Transportation Officials, 2017

AASHTO T 221-90 (2017)

Standard Method of Test for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components for Use in Evaluation and Design of Airport and Highway Pavements (ASTM D 1195/D 1195M-09)
standard by American Association of State and Highway Transportation Officials, 1990

AASHTO T 213M/T 213-08

Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles
standard by American Association of State and Highway Transportation Officials, 08/01/2008

AASHTO T 166-11

Standard Method of Test for Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens
standard by American Association of State and Highway Transportation Officials, 2011

AASHTO T 154-15

Standard Method of Test for Time of Setting of Hydraulic Cement Paste by Gillmore Needles (ASTM Designation: C 266-13)
standard by American Association of State and Highway Transportation Officials, 2015

AASHTO PH12-1

Practitioner's Handbook #12: Assessing Indirect Effects and Cumulative Impacts Under NEPA, First Edition
Handbook / Manual / Guide by American Association of State and Highway Transportation Officials, 04/01/2011

AASHTO T 191-13

Standard Method of Test for Density of Soil In-Place by the Sand-Cone Method
standard by American Association of State and Highway Transportation Officials, 2013

AASHTO T 339-09

Standard Method of Test for Analysis of Structural Steel Coatings for Isocyanate Content
standard by American Association of State and Highway Transportation Officials, 2009