ASD-STAN prEN 3807
Anaerobic polymerisable compounds – Torque strength 16 Nm – Viscosity 500 mm squared per second
Data Sheet by ASD-STAN Standardization, 01/31/1995
Side Navigation
X
ASD-STAN prEN 2267-002
Aerospace series – Cables, electrical, for general purpose – Operating temperatures between – 55 deg C and 260 deg C – Part 002: General
Data Sheet by ASD-STAN Standardization, 02/28/2011
ASD-STAN prEN 2434-2
Aerospace series-Paints and varnishes-Two component cold curing polyurethane finish-Part 02: High chemical resistance
Data Sheet by ASD-STAN Standardization, 10/01/2001
ASD-STAN prEN 4056-003
Cable ties for harnesses – Part 003: Plastic cable ties, operating temperatures -65 deg C to 105 deg C and -65 deg C to 150 deg C – Product standard
Data Sheet by ASD-STAN Standardization, 06/28/2002
ASD-STAN prEN 3762
Heat resisting alloy FE-PA2601 – Softened and cold worked – Wire for forged fasteners – D <or= 15 mm – 1100 MPa <or= Rm <or= 1300 MPa
Data Sheet by ASD-STAN Standardization, 03/31/1994
ASD-STAN prEN 3475-505
Aerospace series – Cables, electrical, aircraft use – Test methods – Part 505: Tensile test on conductors and strands
Data Sheet by ASD-STAN Standardization, 04/30/2010
ASD-STAN prEN 4293
Aluminium alloy AL-P7175- T73511 – Extruded bar and section – a or D <or= 150mm
Data Sheet by ASD-STAN Standardization, 04/30/1998
ASD-STAN prEN 4097
Heat resisting alloy – NI-CD1401 (NiCo10W10Cr9Al6Ta3) – Vacuum melted – Precipitation treated – Precision castings
Data Sheet by ASD-STAN Standardization, 12/31/1997
ASD-STAN prEN 2691
Aluminium alloy (2017A) – Solution treated, water quench, cold worked and naturally aged (T3) – Sheet and strip – 0,4 <or= a <or= 6 mm
Data Sheet by ASD-STAN Standardization, 03/31/1988
ASD-STAN prEN 2221
Steel FE-PL31 – Hardened and tempered – Hollow bars 3,5 mm <or= a <or= 55 mm
Data Sheet by ASD-STAN Standardization, 08/01/1977