ASD-STAN prEN 2919
Aerospace Series Steel FE-PL72-Carburized, hardened and tempered bar-De is less than or equal to 160 mm
Data Sheet by ASD-STAN Standardization, 03/01/1988
Side Navigation
X
ASD-STAN prEN 2997-003
Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 deg C to 175 deg C continuous, 200 deg C continuous, 260 deg C peak – Part 003: Square flange receptacle – Product standar
Data Sheet by ASD-STAN Standardization, 05/01/2011
ASD-STAN prEN 4701-001
Aerospace series – Connectors, optical, rectangular, modular, operating temperature 125 deg C, for EN 4531 contacts – Part 001: Technical specification
Data Sheet by ASD-STAN Standardization, 12/31/2010
ASD-STAN prEN 4700-7
Aerospace series- Steel and heat resisting alloys -Wrought products Technical specification Part 007: Remelting stock
Data Sheet by ASD-STAN Standardization, 07/01/2009
ASD-STAN prEN 4062
Rolled foil in filler metal for brazing – Thickness a <or= 1 mm – Dimensions
Data Sheet by ASD-STAN Standardization, 12/31/1996
ASD-STAN prEN 6109
Aerospace series – Static seal elements elastomer moulded, phosphate ester resistant – Technical specification
Data Sheet by ASD-STAN Standardization, 12/31/2004
ASD-STAN prEN 4641-103
Aerospace series-Cables, optical 125 mue m diameter cladding-Part 103: Semi-loose, ruggedized simplex construction 62,5/125 mue m GI fibre nominal 2,74 mm, outside diameter Product standard
Data Sheet by ASD-STAN Standardization, 01/01/2010
ASD-STAN prEN 2634
Aluminium alloy 2014A-T4511 – Bar and section – 1,2 <or= (a or D) <or= 200 mm – With peripheral coarse grain control
Data Sheet by ASD-STAN Standardization, 05/01/1985
ASD-STAN prEN 4566
Heat resisting alloy-CO-PH4101 (CoCr20W15Ni) – Vacuum melted – Solution treated – Forgings – De < 100 mm
Data Sheet by ASD-STAN Standardization, 10/31/1999
ASD-STAN prEN 4500-1
Metallic materials – Rules for drafting and presentation of material standards – Part 1: General rules
Data Sheet by ASD-STAN Standardization, 06/28/1996