Side Navigation

X

ASD-STAN prEN 4171

Aerospace series – Paints and varnishes – Test method for determination of phosphoric acid index
Data Sheet by ASD-STAN Standardization, 11/30/2005

ASD-STAN prEN 4644-001

Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 deg C (or 125 deg C) continuous – Part 001: Technical specification
Data Sheet by ASD-STAN Standardization, 09/01/2010

ASD-STAN prEN 4612-010

Aerospace series – Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed – Part 010: Silver plated copper – Operating temperatures, between – 65 deg C and 150 deg C – Dual extruded wall for open a
Data Sheet by ASD-STAN Standardization, 03/31/2005

ASD-STAN prEN 3478

Steel FE-PM63 – solution annealed, transformation treated and precipitation hardened – 1310 <or= Rm <or= 1550 MPa – sheet and strip – a <or= 6 mm
Data Sheet by ASD-STAN Standardization, 03/31/1988

ASD-STAN prEN 4500-5

Metallic materials – Rules for drafting and presentation of material standards – Part 5: Specific rules for steels
Data Sheet by ASD-STAN Standardization, 06/28/1996

ASD-STAN prEN 3713

Nuts, self-locking, bihexagonal, in steel, cadmium plated, MoS2 lubricated – Classification : 1550 MPa (at ambient temperature) / 235 deg C
Data Sheet by ASD-STAN Standardization, 03/01/1991

ASD-STAN prEN 3989

Steel FE-PA2801 (X60NiMnCr13-5-3) – Cold worked and stress relieved – Bar for machining – De <or= 30 mm – Rm >or= 850 MPa
Data Sheet by ASD-STAN Standardization, 11/28/1997

ASD-STAN prEN 6076

Aerospace series – Static seal elements O-Ring straight thread tube fitting boss, ethylene-propylene, moulded, phosphate ester resistant (- 55 deg C to 107 deg C) – Inch series
Data Sheet by ASD-STAN Standardization, 12/31/2004

ASD-STAN prEN 4604-10

Aerospace series-Cable, electrical, for signal transmission Part 010: Cable, coaxial, light weight, 50 ohms, 200 degrees C, type KX (light WD)-Product standard
Data Sheet by ASD-STAN Standardization, 09/01/2010