EEMUA Publication 175
Code of Practice for Calibration and Checking Process Analyzers – Formerly I.P. Code of Practice, Revised 2015
standard by Engineering Equipment and Materials Users Association, 09/01/2013
Side Navigation
X
EEMUA Publication 225
Above ground plastic tanks: A guide to their specification, installation, commissioning, inspection, maintenance, repair and disposal
standard by Engineering Equipment and Materials Users Association, 10/01/2017
EEMUA Publication 133
Specification for Underground Armoured Cable Protected against Solvent Penetration and Corrosive Attack, Revised 2015
standard by Engineering Equipment and Materials Users Association, 05/01/2011
EEMUA Publication 231
The Mechanical Integrity of Plant Containing Hazardous Substances – A Guide to Periodic Examination and Testing
standard by Engineering Equipment and Materials Users Association, 09/01/2012
EEMUA Publication 194
Guidelines for Materials Selection and Corrosion Control for Subsea Oil and Gas Production Equipment
standard by Engineering Equipment and Materials Users Association, 09/01/2019
EEMUA Publication 140
Noise Procedure Specification, Revised 2015
standard by Engineering Equipment and Materials Users Association, 11/01/2014
EEMUA Publication 176
Specification for structural castings for use offshore, Revised 2015
standard by Engineering Equipment and Materials Users Association, 01/01/1998
EEMUA Publication 151
Liquid Ring Vacuum Pumps and Compressors, Revised 2015
standard by Engineering Equipment and Materials Users Association, 01/01/1987
EEMUA Publication 201
Process Plant Control Desks Utilising Human-Computer, Revised 2015
standard by Engineering Equipment and Materials Users Association, 03/01/2010
EEMUA Publication 222
Guide to the Application of IEC 61511 to Safety Instrumented Systems in the UK Process Industries, Revised 2015
standard by Engineering Equipment and Materials Users Association, 06/01/2009