IEC 61298-1 Ed. 1.0 b:1995
Process measurement and control devices – General methods and procedures for evaluating performance – Part 1: General considerations
standard by International Electrotechnical Commission, 08/03/1995
Side Navigation
X
IEC 61557-8 Ed. 1.0 b:1997
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 8: Insulation monitoring devices for IT systems
standard by International Electrotechnical Commission, 02/14/1997
IEC 61347-1 Ed. 2.0 b:2007
Lamp controlgear – Part 1: General and safety requirements
standard by International Electrotechnical Commission, 01/31/2007
IEC 61300-3-30 Ed. 1.0 b:2003
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-30: Examinations and measurements – Polish angle and fibre position on single ferrule multifibre connectors
standard by International Electrotechnical Commission, 01/17/2003
IEC 61462 Ed. 1.0 b:2007
Composite hollow insulators – Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V – Definitions, test methods, acceptance criteria and design recommendations
standard by International Electrotechnical Commission, 02/23/2007
IEC 61340-4-4 Ed. 2.0 b:2012
Electrostatics – Part 4-4: Standard test methods for specific applications – Electrostatic classification of flexible intermediate bulk containers (FIBC)
standard by International Electrotechnical Commission, 2012
IEC 61300-2-40 Ed. 1.0 b:2000
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-40: Test – Screen testing of attenuation of single-mode tuned angled optical connectors
standard by International Electrotechnical Commission, 07/31/2000
IEC 61280-2-3 Ed. 1.0 en:2009
Fibre optic communication subsystem tets procedures – Part 2-3: Digital systems – Jitter and wander measurements
standard by International Electrotechnical Commission, 07/14/2009
IEC 61249-2-31 Ed. 1.0 b:2009
Materials for printed boards and other interconnecting structures – Part 2-31: Reinforced base materials, clad and unclad – Halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 4,1 at 1 GHz) and flammability (vertical
standard by International Electrotechnical Commission, 02/11/2009
IEC 61300-3-21 Ed. 3.0 b:2019
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-21: Examinations and measurements – Switching time
standard by International Electrotechnical Commission, 09/20/2019