IEC 61347-2-9 Amd.2 Ed. 1.0 b:2006
Amendment 2 – Lamp controlgear – Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps)
Amendment by International Electrotechnical Commission, 06/13/2006
Side Navigation
X
IEC 61326-2-4 Ed. 1.0 b CORR1:2011
Corrigendum 1 – Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-4: Particular requirements – Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation f
Corrigenda by International Electrotechnical Commission, 07/13/2011
IEC 61676 Ed. 1.1 en:2009
Medical electrical equipment – Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 01/26/2009
IEC 61508-7 Ed. 2.0 b:2010
Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 7: Overview of techniques and measures (see
standard by International Electrotechnical Commission, 04/30/2010
IEC 61391-1 Amd.1 Ed. 1.0 b:2017
Amendment 1 – Ultrasonics – Pulse-echo scanners – Part 1: Techniques for calibrating spatial measurement systems and measurement of point-spread function response
Amendment by International Electrotechnical Commission, 07/10/2017
IEC 61400-3-1 Ed. 1.0 en:2019
Wind energy generation systems – Part 3-1: Design requirements for fixed offshore wind turbines
standard by International Electrotechnical Commission, 04/05/2019
IEC 61753-089-2 Ed. 1.0 en:2013
Fibre optic interconnecting devices and passive components – Performance standard – Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C – Controlled environment
standard by International Electrotechnical Commission, 03/06/2013
IEC 61300-2-33 Ed. 1.0 b:1995
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-33: Tests – Assembly and disassembly of closures
standard by International Electrotechnical Commission, 06/19/1995
IEC 61675-2 Ed. 1.1 en:2005
Radionuclide imaging devices – Characteristics and test conditions – Part 2: Single photon emission computed tomographs CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 02/07/2005
IEC 61300-3-35 Ed. 1.0 en CORR1:2010
Corrigendum 1 – Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-35: Examinations and measurements – Fibre optic connector endface visual and automated inspection
Corrigenda by International Electrotechnical Commission, 06/28/2010