IEC 61758-1 Ed. 1.0 en:2008
Fibre optic interconnecting devices and passive components – Interface standard for closures – Part 1: General and guidance
standard by International Electrotechnical Commission, 04/25/2008
Side Navigation
X
IEC 61753-111-9 Ed. 1.0 b:2009
Fibre optic interconnecting devices and passive components performance standard – Part 111-9: Sealed closures for category S – Subterranean
standard by International Electrotechnical Commission, 11/10/2009
IEC 61400-21-1 Ed. 1.0 b:2019
Wind energy generation systems – Part 21-1: Measurement and assessment of electrical characteristics – Wind turbines
standard by International Electrotechnical Commission, 05/20/2019
IEC 61754-2 Ed. 1.0 b:1996
Fibre optic connector interfaces – Part 2: Type BFOC/2,5 connector family
standard by International Electrotechnical Commission, 12/12/1996
IEC 61753-042-2 Ed. 1.0 b:2014
Fibre optic interconnecting devices and passive components – Performance standard – Part 042-2: Plug-pigtail-style and plug-receptacle-style of OTDR reflecting devices for category C – Controlled environments
standard by International Electrotechnical Commission, 08/21/2014
IEC 61300-3-2 Ed. 2.0 b:1999
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-2: Examinations and measurements – Polarization dependence of attenuation in a single-mode fibre optic device
standard by International Electrotechnical Commission, 06/17/1999
IEC 61362 Ed. 1.0 b:1998
Guide to specification of hydraulic turbine control systems
standard by International Electrotechnical Commission, 03/31/1998
IEC 61757 Ed. 1.0 b:2018
Fibre optic sensors – Generic specification
standard by International Electrotechnical Commission, 01/25/2018
IEC 61756-1 Ed. 1.0 b:2006
Fibre optic interconnecting devices and passive components – Interface standard for fibre management systems – Part 1: General and guidance
standard by International Electrotechnical Commission, 05/11/2006
IEC 61760-3 Ed. 1.0 b:2010
Surface mounting technology – Part 3: Standard method for the specification of components for through hole reflow (THR) soldering
standard by International Electrotechnical Commission, 03/16/2010