Side Navigation

X

IEC 61753-1-3 Ed. 1.0 en:2014

Fibre optic interconnecting devices and passive components – Performance standard – Part 1-3: General and guidance for single-mode fibre optic connector and cable assembly for industrial environment, Category I
standard by International Electrotechnical Commission, 05/23/2014

IEC 61756-1 Ed. 1.0 b:2006

Fibre optic interconnecting devices and passive components – Interface standard for fibre management systems – Part 1: General and guidance
standard by International Electrotechnical Commission, 05/11/2006

IEC 61760-3 Ed. 1.0 b:2010

Surface mounting technology – Part 3: Standard method for the specification of components for through hole reflow (THR) soldering
standard by International Electrotechnical Commission, 03/16/2010

IEC 61523-2 Ed. 1.0 en:2002

Delay and power calculation standards – Part 2: Pre-layout delay calculation specification for CMOS ASIC libraries
standard by International Electrotechnical Commission, 05/17/2002

IEC 61300-3-16 Ed. 2.0 b:2003

Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-16: Examinations and measurements – Endface radius of spherically polished ferrules
standard by International Electrotechnical Commission, 01/15/2003

IEC 61582 Ed. 1.0 b:2004

Radiation protection instrumentation – In vivo counters – Classification, general requirements and test procedures for portable, transportable and installed equipment
standard by International Electrotechnical Commission, 01/08/2004

IEC 61754-6 Ed. 2.0 b:2013

Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces – Part 6: Type MU connector family
standard by International Electrotechnical Commission, 07/22/2013

IEC 61753-081-2 Ed. 1.0 en:2009

Fibre optic interconnecting devices and passive components performance standard – Part 081-2: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C – Controlled environments
standard by International Electrotechnical Commission, 08/11/2009

IEC 61730-1 Ed. 1.2 b:2013

Photovoltaic (PV) module safety qualification – Part 1: Requirements for construction CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 03/14/2013